DTC B100D-61: Column Lock Authorization - Signal calculation failure: Action
NOTE:
To validate the repair firstly run the engine for at least 60 seconds, then use the Jaguar Land Rover approved diagnostic equipment to check the Diagnostic Trouble Code(s) within the body control module. If the repair is successful this DTC will no longer be set
- Using the Jaguar Land Rover approved diagnostic equipment, check the anti-lock brake system control module for related Diagnostic Trouble Code(s) and refer to the relevant DTC index
- Using the Jaguar Land Rover approved diagnostic equipment, perform a CAN network integrity test. Refer to the electrical circuit diagrams and check the high speed CAN bus (powertrain) circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness as necessary