DTC B1096-52: Wiper High/Low Relay - Not activated: Action
NOTE:
To validate the repair use the Jaguar Land Rover approved diagnostic equipment to perform the diagnostic routine - Enable Protected Outputs (205E). The diagnostic routine can be located on the diagnostic equipment within "BCM - ECU functions". When complete use the Jaguar Land Rover approved diagnostic equipment to perform the diagnostic routine - On Demand Self Test. If the repair is successful this DTC will no longer be set within the body control module
- Install a new wiper fast/slow relay as necessary
- Refer to the electrical circuit diagrams and check the windshield wiper motor fast/slow relay circuit for short circuit to power. Repair the wiring harness as necessary