DTC B1101-52: Comfort Relay - Not Activated: Action
NOTE:
To validate the repair use the Jaguar Land Rover approved diagnostic equipment to perform the diagnostic routine - Enable Protected Outputs (205E). The diagnostic routine can be located on the diagnostic equipment within "BCM - ECU functions". When complete use the Jaguar Land Rover approved diagnostic equipment to perform the diagnostic routine - On Demand Self Test. If the repair is successful this DTC will no longer be set within the body control module
- Install a new comfort relay as necessary
- Refer to the electrical circuit diagrams and check the comfort relay circuit for short circuit to ground. Repair the wiring harness as necessary