DTC B136E-52: Glove Box Release Motor - Not activated: Action

NOTE: To validate the repair use the Jaguar Land Rover approved diagnostic equipment to perform the diagnostic routine - Enable Protected Outputs (205E). The diagnostic routine can be located on the diagnostic equipment within "BCM - ECU functions". When complete use the Jaguar Land Rover approved diagnostic equipment to perform the diagnostic routine - On Demand Self Test. If the repair is successful this DTC will no longer be set within the body control module. Alternatively run the engine for 30 seconds and check the lower glovebox latch release function, then use the Jaguar Land Rover approved diagnostic equipment to check this DTC is no longer set within the body control module

Refer to the electrical circuit diagrams and check the lower glovebox latch motor circuit for short circuit to ground. Repair the wiring harness as necessary