DTC P0C09-1B: Drive Motor "B" Phase U-V-W Circuit Low - Circuit resistance above threshold: Action
NOTE:
If available, perform the guided diagnostics associated with this DTC.
- Check that the Belt Integrated Starter Generator (BISG) high voltage cable connectors are correctly seated and latched. Rectify as necessary
- Inspect the Belt Integrated Starter Generator (BISG) high voltage cable for damage. Install a new Belt Integrated Starter Generator (BISG) high voltage cable as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, run application - ECU Diagnostics/Electric Power Inverter Converter Control Module 'B' (EPICB)/Clear DTCs. Retest. If the fault persists, raise a Technical Assistance (TA):
- Attach the Pathfinder session file using 'Pathfinder Sessions'
- Use the Diagnostic Trouble Code (DTC) as a reference number in the Customer Comments field
- Describe primary and secondary diagnostics completed