DTC P062F-56: Internal Control Module EEPROM Error - Invalid/incomplete configuration: Action
- If available using the Jaguar Land Rover approved diagnostic equipment, select one of the following guided diagnostic concern areas below, or select the guided diagnostic using the available tab
- Powertrain - Transmission and Driveline - Loss Of Traction
- Warning - Messages - 2 wheel drive only - traction reduced
- Cycle the ignition, Clear the DTCs and retest. If the fault persists, read datalogger signal - Internal Fail Code (0xD703). If the value is 0x79, install a new driveline disconnect control module. If the value is not 0x79 install a new all wheel drive control module, clear the DTCs and run the All-Wheel-Drive Healthcheck