DTC C106A-22: Left Rear Wheel Hub Vertical Acceleration Sensor - Signal amplitude > maximum: Action
- With the vehicle parked on a level surface and using the Jaguar Land Rover approved diagnostic equipment, check datalogger signal - Left Rear Wheel Hub Acceleration Sensor Voltage 2097. Expected voltage is between 2.4 to 2.6 volts. If the voltage values are outside this range, check the rear left vertical accelerometer signal circuit for short circuit to another circuit, loose electrical connections, repair as required
- If no wiring faults are present, check that the rear left vertical accelerometer is correctly and securely mounted, repair as required. Clear the DTC and retest
- If the fault persists, install a new rear left vertical accelerometer. Clear the DTC and retest