DTC C106B-22: Right Rear Wheel Hub Vertical Acceleration Sensor - Signal amplitude > maximum: Action

With the vehicle parked on a level surface and using the Jaguar Land Rover approved diagnostic equipment, check datalogger signal - Right Rear Wheel Hub Acceleration Sensor Voltage 2096. Expected voltage is between 2.4 to 2.6 volts. If the voltage values are outside this range, check the rear right vertical accelerometer signal circuit for short circuit to another circuit, loose electrical connections, repair as required
If no wiring faults are present, check that the rear right vertical accelerometer is correctly and securely mounted, repair as required. Clear the DTC and retest
If the fault persists, install a new rear right vertical accelerometer. Clear the DTC and retest