DTC P080A-54: Clutch Position Not Learnt - Missing calibration: Action
- If available using the Jaguar Land Rover approved diagnostic equipment, select one of the following guided diagnostic concern areas below, or select the guided diagnostic using the available tab
- Powertrain - Transmission and Driveline - Loss Of Traction
- Warning - Messages - 2 wheel drive only - traction reduced
- Using the Jaguar Land Rover approved diagnostic equipment, run application - Clutch Calibration. Read datalogger signal - Driveline Clutch Biting Point Actuator Position (0x0777). If the value exceeds 340, install a new rear drive unit as necessary
- If the fault persists, check and install a new all wheel drive control module as necessary