C111B-24: Left Stop Lamp - Signal stuck high: Action

NOTE: To validate the repair run the engine for 10 seconds, stop the engine, run the engine for another 10 seconds and check the stop lamp function. Then use the Jaguar Land Rover approved diagnostic equipment to check this DTC is no longer set in the body control module. Alternatively use the Jaguar Land Rover approved diagnostic equipment to perform the diagnostic routine - On Demand Self Test. If the repair is successful this DTC will no longer be set within the body control module

Refer to the electrical circuit diagrams and check the left stop lamp circuit for short circuit to power, open circuit, high resistance. Repair the wiring harness as necessary