Possible Causes
- Electrical Cause
- Mechanical Cause
- Monitor Description
- EEPROM throttle end stop or limp home adaption data is not present for throttle and new adaption data this trip is also out of valid voltage range
- Purpose of the DTC
- Throttle adaptions not performed or erroneous, could compromise ability to apply a throttle limphome successfully under other fault conditions
- Prioritized List of Possible Causes
- Electric throttle actuator adaption routine entry conditions are not met
- Electric throttle actuator adaption routine not completed
- Replacement throttle installed but adaption routine not completed
- Electric throttle actuator failure