B00C0-7B: Passenger Seat Occupant Classification Sensor "A" - Low fluid level: Action

NOTE:

If a new occupant classification sensor service kit is installed the new module replacement and programming procedure must be performed
Do not attempt to install individual components from the occupant classification sensor service kit, as they are calibrated to function as a single assembly

Check the seat and associated fixings are correctly installed. Rectify installation as required. Clear DTC and retest
If the fault persists, check the integrity of the occupant classification sensor bladder hose routing. Re-attach as necessary. Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest
If the fault persists, check and install a new occupant classification kit and follow the reprogramming procedure. Refer to OCCUPANT CLASSIFICATION SENSOR CONTROL MODULE (OCSCM) NEW MODULE REPLACEMENT AND PROGRAMMING .
Using the Jaguar Land Rover approved diagnostic equipment, perform routine - Learn Seat Occupant Classification Zero Position. Clear the DTCs and retest