Programming Passive Mode Off

Remove ignition key from key cylinder. Ensure all doors, engine hood and trunk are closed and unlocked. Perform one of the following methods within 30 seconds:

• Lock or unlock any door with key or remote keyless entry system.
• Open driver door or lock and unlock driver door lock knob 3 times.

After performing one method listed above, system should start force lock after 2 seconds. Perform one of the following methods within 10 seconds:

• Unlock driver door lock knob.
• Close and open driver door 4 times.
• Lock and unlock driver door lock knob.

After performing one method listed above, system should start force lock after 2 seconds. Passive mode should now be on.