Does Not Start
Engine Does Not Crank
- Check battery and battery cables.
- Check starter.
- Check starter relay. See appropriate SYSTEM & COMPONENT TESTING article.
No Initial Combustion
- Check engine immobilizer system. See appropriate ENGINE IMMOBILIZER SYSTEMS article in ACCESSORIES & EQUIPMENT.
- Check ECM power source circuit with ignition on. See ECM POWER SOURCE CIRCUIT (IGNITION KEYED) under COMPUTERIZED ENGINE CONTROLS in appropriate SYSTEM & COMPONENT TESTING article.
- Check fuel pump control circuit. On all models except LX470, see FUEL PUMP CONTROL CIRCUIT under FUEL SYSTEM in appropriate SYSTEM & COMPONENT TESTING article. On LX470, perform DTC P1200: FUEL PUMP RELAY/ECU CIRCUIT test in SELF-DIAGNOSTICS - LX470 article.
- Check Electronic Control Module (ECM) connector for loose, damaged or corroded terminals and repair as necessary. If connector is okay, check ECM ground circuits. See appropriate wiring diagram in POWER DISTRIBUTION article in WIRING DIAGRAMS. Repair as necessary. If ground circuits are okay, replace ECM with a known-good ECM and retest.
No Complete Combustion
- Check fuel pump control circuit. On all models except LX470, see FUEL PUMP CONTROL CIRCUIT under FUEL SYSTEM in appropriate SYSTEM & COMPONENT TESTING article. On LX470, perform DTC P1200: FUEL PUMP RELAY/ECU CIRCUIT test in SELF-DIAGNOSTICS - LX470 article.