LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2000 >> SC 300 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul, Installation >> Fuel System >> Fuel Pump >> Removal (RX300)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal (RX300)

  1. Remove driver's side rear seat. Remove carpet and floor service hole cove on floor panel for access to electrical connector for fuel pump. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect negative battery cable. Disconnect fuel pump and sender gauge connector. See Figure.
  2. Ensure area around fuel line at fuel pump is clean. Disconnect fuel line from fuel pump. See Figure. Remove fuel tank vent tube set plate. Remove fuel pump assembly and gasket from fuel tank. Ensure that fuel pump filter and sender gauge arm are not damaged or bent.