September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Power Window Master Switch Circuit
- Disconnect the connectors from the power window master switch and inspect the connector on the wiring harness side. See CONNECTOR IDENTIFICATION . See INSPECTING POWER WINDOW MASTER SWITCH CIRCUIT table. If the circuit is not as specified, replace the switch. See Figure.
INSPECTING POWER WINDOW MASTER SWITCH CIRCUIT
| Tester Connection |
Condition |
Specified Condition |
| 9 - Ground |
Constant |
Continuity |
| 1, 5 - Ground |
Constant |
B+ Voltage |
| 2, 4 - Ground |
Ignition Switch LOCK |
No Voltage |
| 2, 4 - Ground |
Ignition Switch ACC Or ON |
B+ Voltage |
- Inspect the power window master switch circuit. See POWER WINDOW MASTER SWITCH CIRCUIT under CIRCUIT TESTS in appropriate BODY CONTROL SYSTEM article.