LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2003 >> IS 300 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0130, DTC P0150 Or DTC P2195, DTC P2196, DTC P2197 Or DTC P2198 >> Confirmation Driving Pattern
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Confirmation Driving Pattern

Connect scan tool to Data Link Connector (DLC) No. 3. See Figure. If using Lexus scan tool, switch to CHECK mode. On both scan tools, start and warm engine to normal operating temperature. Allow engine to idle for 100 seconds or more. Drive vehicle at 24 MPH or more for 20 seconds. Stop vehicle and allow engine to idle for 20 seconds or more. Repeat driving and idle part of test 2 more times. At last idle test, allow engine to idle for 30 seconds. If using OBD-II scan tool, turn engine off. Repeat this procedure. If using either scan tool, if malfunction exists, MIL will illuminate.

scientia non olet · About LEMON Manuals