Transmitter Sub-ASSY Module Set Door Control: Replacement

HINT:

The installation is in the reverse order of the removal.

1. REMOVE TRANSMITTER SUB-ASSY MODULE SET DOOR CONTROL 
   NOTE: Special caution should be taken when handling each component as they are precise electronic components.
   1. Using a screwdriver, remove the screw.
   2. Push the cover with your finger as shown in the illustration so a gap appears. Then, pry out the cover using that gap.
   NOTE: Do not forcibly pry up the cover.
   Fig 1: Opening Transmitter Sub-Assy Module Set Door Control

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002