Center Cluster Integration Switch: Disassembly

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE HEATER CONTROL BASE BRACKET LH
1. Remove the 2 bolts and heater control base bracket LH.
  
  Fig 1: Identifying Heater Control Base Bracket LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE HEATER CONTROL BASE BRACKET RH
1. Remove the 2 bolts and heater control base bracket RH.
  
  Fig 2: Identifying Heater Control Base Bracket RH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE HEATER CONTROL HOUSING SUB-ASSEMBLY
1. Remove the 4 screws and heater control housing sub-assembly.
  
  Fig 3: Locating Heater Control Housing Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE MULTI INFORMATION DISPLAY SUB-ASSEMBLY
1. Release the lock of the connector and disconnect the cable.
  
  Fig 4: Identifying Cable With Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 screws and multi information display sub-assembly.
  
  Fig 5: Identifying Multi Information Display Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002