Typical Enabling Conditions
All:
TYPICAL ENABLING CONDITIONS - ALL
| Monitor runs whenever following DTCs are not present | None |
P2111 (Throttle actuator stuck open):
P2111 (THROTTLE ACTUATOR STUCK OPEN)
| System guard* | ON |
|---|---|
| Throttle actuator current | 2 A or more |
| Duty cycle to close throttle | 80 % or more |
P2112 (Throttle actuator stuck closed):
P2112 (THROTTLE ACTUATOR STUCK CLOSED)
| System guard* | ON |
|---|---|
| Throttle actuator current | 2 A or more |
| Duty cycle to open throttle | 80 % or more |
| System guard is set when following conditions are met: | - |
| Throttle actuator | ON |
| Throttle actuator duty calculation | Executing |
| Throttle position sensor | Fail determined |
| Throttle actuator current-cut operation | Not executing |
| Throttle actuator power supply | 4 V or more |
| Throttle actuator | Fail determined |