September 30: LEMON manuals is back up on a temporary server! Slowness is possible
DTC U0126 Lost Communication with Steering Angle Sensor Module: Description
If 2 or more DTCs are output during the DTC check, one side of the CAN branch wire may be open. (One side of the CANH [branch wire] /CANL [branch wire] of the ECU and/or sensor is open.)
DTC DETECTION CONDITION CHART
| DTC No. |
DTC Detection Condition |
Trouble Area |
| U0126 |
When either condition below is met:
- "STEERING ANGLE SENSOR" is not displayed on the "BUS CHECK" screen of the intelligent tester
- Applies to "STEERING ANGLE SENSOR COMMUNICATION STOP MODE" in the "DTC COMBINATION TABLE"
|
- Power source circuit of steering angle sensor
- One side of CAN branch wire of other systems
- Steering angle sensor branch wire or connector
- Steering angle sensor
|