Component Function Check
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "TILT PULSE" in "Data monitor" mode with CONSULT-III.
- Check tilt sensor signal under the following conditions.
MONITOR ITEM CONDITION CHART
| Monitor item | Condition | Value | |
|---|---|---|---|
| TILT PULSE | Steering column | Operate (UP-WARD | Change (increase) |
| Operate (DOWN-WARD) | Change (decrease) | ||
| Release | No change | ||
Is the indication normal?
YES: Inspection End.
NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".