LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 614 (Audio, Visual, Navigation System) >> Base Audio >> Function Diagnosis >> Diagnosis System (BLUETOOTH Control Unit) >> Diagnosis Description >> Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to ACC or ON.
  2. Wait for the Bluetooth system to complete initialization. This may take up to 10 seconds.
  3. Press and hold the steering wheel audio control switch SEND button for at least 5 seconds. The Bluetooth system will begin to play a verbal prompt.
    Fig 1: Locating Steering Wheel Audio Control Switch SEND Button
    G05885654Courtesy of NISSAN MOTOR CO., U.S.A.
  4. While the prompt is playing, press and hold the steering wheel audio control switch END button until you hear the "Diagnostics mode" prompt. The Bluetooth system will sound a 5-second beep.
  5. While the beep is sounding, press and hold the steering wheel audio control switch END button again until you hear prompts.
  6. The Bluetooth system has now entered into the diagnostic mode. Results of the diagnostic checks will be verbalized to the technician. Refer to "WORK FLOW ".
    Fig 2: Locating Steering Wheel Audio Control Switch END Button
    G05885655Courtesy of NISSAN MOTOR CO., U.S.A.
  7. After the failure records are reported, an interactive microphone test will be performed. Follow the voice prompt. If the microphone test fails, refer to "WORK FLOW ".
  8. Self-diagnosis mode is complete when the voice prompt says "All diagnostic functions completed".
scientia non olet · About LEMON Manuals