LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> SC 430 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Skid Control Ecu >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Skid Control Ecu: Removal

  1. FOLLOW PRECAUTION 
    1. Follow the PRECAUTION .
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  3. REMOVE DOOR SCUFF PLATE ASSEMBLY LH (See  REMOVAL  ) 
  4. REMOVE FRONT DOOR OPENING TRIM COVER LH (See  REMOVAL  ) 
  5. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (See  REMOVAL  ) 
  6. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY (See  REMOVAL  ) 
  7. REMOVE SKID CONTROL ECU 
    1. Disconnect the ECU and skid control buzzer connectors.
    2. Remove the 2 bolts and ECU.
      Fig 1: Locating Bolts And ECU
      G05290722Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE SKID CONTROL BUZZER ASSEMBLY 
    1. Using pliers, remove the buzzer.
scientia non olet · About LEMON Manuals