September 30: LEMON manuals is back up on a temporary server! Slowness is possible
EFI Relay: Inspection
- INSPECT EFI RELAY
- Using an ohmmeter, measure the resistance according to the value(s) in the table below.
Standard Resistance
TESTER CONNECTION SPECIFIED CONDITION CHART
| Tester connection |
Specified Condition |
| 1E-7 - 1E-12 |
10 kΩ or higher |
| 1E - 7-1E-12 |
Below 1 Ω (Battery voltage applied between terminals 1E-9 and 1E-10) |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002