LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GS 450h >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Can Communication >> Can Communication System >> DTC U0131-433 Lost Communication with Power Steering Control Module; DTC U0131-434 Lost Communication with Power Steering Control Module >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0131-433 Lost Communication with Power Steering Control Module; DTC U0131-434 Lost Communication with Power Steering Control Module: Notes

If 2 or more DTCs are output during the DTC check, one side of the CAN branch wire may be open. (One side of the CANH [branch wire] /CANL [branch wire] of the ECU and/or sensor is open.)

DTC DETECTION CONDITION AND TROUBLE AREA CHART

DTC No. DTC Detection Condition Trouble Area
  • U0131-433
  • U0131-434
When either condition below is met:
  • "EPS" is not displayed on the "CAN Bus Check" screen of the Techstream
  • Applies to "POWER STEERING ECU COMMUNICATION STOP MODE" in the "DTC COMBINATION TABLE"
  • Power source circuit of power steering ECU
  • Power steering ECU branch wire or connector
  • Power steering ECU
  • One side of CAN branch wire