September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Fuel Pump Resistor: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE COOL AIR INTAKE DUCT SEAL
(See
REMOVAL
)
- REMOVE ENGINE ROOM RH SIDE COVER
(See
REMOVAL
)
- REMOVE FUEL PUMP RESISTOR
- Disconnect the connector and clamp from the fuel pump resistor.
- Remove the 3 bolts and fuel pump resistor, and disconnect the ground wire.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002