Inspection Procedure

HINT

Read freeze frame data using the intelligent tester or Techstream. Freeze frame data records the engine condition when malfunctions are detected When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air-fuel ratio was lean or rich, and other data from the time the malfunction occurred

1. CHECK ANY OTHER DTC OUTPUT (IN ADDITION TO DTC P0121) 
   1. Connect the intelligent tester or Techstream to the DLC3
   2. Turn the power switch ON (IG).
   3. Turn the tester ON.
   4. Enter the following menus
      1. Intelligent tester - Select: DIAGNOSIS / ENHANCED OBD II / DTC INFO / CURRENT CODES
      2. Techstream - Select: Powertrain / Engine and ECT / Trouble Codes.
   5. Read the DTC.

      Result 

      RESULT REFERENCE
      
      

      Display (DTC output)	Proceed to
      P0121	A
      P0121 and other DTCs	B

   B: GO TO DTC CHART  (See DIAGNOSTIC TROUBLE CODE CHART )

   A: REPLACE THROTTLE BODY  (See REMOVAL )