LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> LS 600hL >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Starting) >> Power Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Switch: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL POWER SWITCH 
    1. Attach the 2 claws to install the switch.
    2. Connect the switch connector.
  2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY  (See INSTALLATION )
  3. INSTALL NO. 1 INSTRUMENT CLUSTER MOLDING  (See INSTALLATION )
  4. INSTALL INSTRUMENT SIDE PANEL LH  (See INSTALLATION )
    Fig 1: Connecting Switch Connector
    G05780720Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
  6. INSTALL BATTERY SERVICE HOLE COVER LH  (See INSTALLATION )
  7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY  (See INSTALLATION )
scientia non olet · About LEMON Manuals