DTC P0607: Control Module Performance: Procedure
- CHECK WHETHER DTC OUTPUT RECURS (IN ADDITION TO DTC P0607)
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Clear the DTC.
- Turn the ignition switch off.
- Disconnect the battery negative terminal and wait for 1 minute.
- Connect the battery negative terminal.
- Turn the ignition switch to ON.
- Select the following menu items: Powertrain / Engine and ECT / Trouble Codes.
- Read the DTCs.
Result
Display (DTC output) Proceed to P0607 A No output DTC B
B → CHECK FOR INTERMITTENT PROBLEMS
A → REPLACE ECM