LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2010 >> IS 250 AWD >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting (Service Information) >> Engine Switch >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Switch: Installation: Installation

  1. INSTALL ENGINE SWITCH 
    1. Attach the 2 claws to install the switch.
      Fig 1: Identifying Engine Switch
      GTY127230Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the switch connector.
  2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)  . Refer to INSTALLATION - Step 4
  3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)  . Refer to INSTALLATION - Step 8
  4. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL  . Refer to INSTALLATION - Step 41
  5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  . Refer to INSTALLATION - Step 42
  6. INSTALL CONSOLE BOX  . Refer to INSTALLATION - Step 43
  7. INSTALL CONSOLE BOX REGISTER ASSEMBLY  . Refer to INSTALLATION - Step 44
  8. INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY  . Refer to INSTALLATION - Step 45
  9. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)  . Refer to INSTALLATION - Step 46
  10. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)  . Refer to INSTALLATION - Step 47
  11. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)  . Refer to INSTALLATION - Step 48
  12. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission)  . Refer to INSTALLATION - Step 49
  13. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission)  . Refer to INSTALLATION - Step 50
  14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) 
  15. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) 
scientia non olet · About LEMON Manuals