LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2010 >> IS 250C Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Mirrors >> Power Mirror Control (Diagnostics) >> POWER MIRROR CONTROL SYSTEM (w/ Memory) >> System Description >> System Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

System Description

  1. POWER MIRROR CONTROL SYSTEM DESCRIPTION 
    1. This system has the following functions: automatic glare-resistant electrochromic (EC) mirror function, auto electric retract function, reverse shift-linked function, electrical remote control function, memory function and mirror heater function.
  2. FUNCTION OF MAIN COMPONENT 
    Component Function
    Vertical mirror motor Receives a signal from the outer mirror control ECU assembly and adjusts the mirror surface position vertically.
    Horizontal mirror motor Receives a signal from the outer mirror control ECU assembly and adjusts the mirror surface position horizontally.
    Power retract mirror motor Receives a signal from the outer mirror control ECU assembly, and retracts and returns the outer rear view mirrors.
    Mirror heater Receives a signal from the A/C amplifier assembly and operates the mirror heater.
    EC mirror cell Varies reflection rate of the mirror through function of EC elements.
    Outer mirror retract switch Retracts and returns the outer rear view mirrors. Mirror retract and return signals are sent to the outer mirror control ECU assembly from the main body ECU RH (cowl side junction block RH).
    Mirror select switch Consists of R and L switches. One must be chosen to operate the outer mirror switch assembly.
    Outer mirror control ECU assembly Sends operation signals to each motor.
    Mirror adjust switch Mirror R and L signals are sent to the outer mirror control ECU assembly from the mirror select switch.
    After selecting the R or L switch, the right, left, up and down control switches can be operated to change the angle of the mirror.
    Mirror position sensor Detects the mirror surface position. This data is detected by the outer mirror control ECU assembly.
    Seat memory switch When the seat memory M1, M2 or M3 switch is pressed while the SET switch is being pressed, or M1, M2 or M3 switch is pressed within 3 seconds after the SET switch being pressed, a signal is input to the outer mirror control ECU assembly and the position control ECU and switch assembly, which records the mirror surface position.
    When the seat memory switch is pressed, a signal is input to the outer mirror control ECU assembly and sent to the position control ECU and switch assembly, which changes the mirror surface position to the recorded position.
  3. SYSTEM OPERATION 
    1. The remote control mirror has the following features.
      Function Outline
      Power retract mirror function Retracts and returns the outer rear view mirrors when the outer mirror retract switch is pressed.
      AUTO power retract mirror function Retracts and returns the outer rear view mirror if any of the following signals are detected while the engine switch is off and the power retract mirrors have been set to AUTO using the satellite switch and multi information display.
      • Manual lock/unlock
      • Key-linked lock/unlock
      • Wireless door lock/unlock
      • Wireless 30 seconds auto lock
      • Entry lock/unlock
      • Smart 30 seconds auto lock
      Reverse shift-linked function of mirrors Directs the mirror surface downward to improve visibility when driving in reverse and all the conditions below are met:
      • The engine switch is on (IG).
      • Shift lever is moved to R.
      • The mirror select switch is in the R or L position.
      Electrical remote control mirror function When the outer mirror switch assembly is operated, this function moves the mirror surface vertically or horizontally to enable the driver to attain an optimal mirror angle. Setting the mirror select switch to the R position operates the right mirror, and setting it to the L position operates the left mirror.
      Memory and reactivation function Stores the adjusted mirror position in the outer mirror control ECU assembly.
      Automatic glare-resistant EC mirror function Reduces glare/reflection in the mirror during nighttime driving for safe driving conditions.
      Glare/reflection from vehicle headlights behind could blind driver and cause dangerous driving conditions.
      Mirror heater function Automatically turns on mirror heater when the rear window defogger switch is turned on, or the wipers are operated automatically or manually. The rear window defogger and mirror heater automatically turn off after 15 min.
      Rear window defogger and mirror heater automatically turn off after 15 min.