DTC P0101: Mass Air Flow Circuit Range / Performance Problem: Procedure

1. Put the engine in inspection mode. Refer to INSPECTION MODE PROCEDURE .
2. Connect the Techstream to the DLC3.
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
5. Read the DTCs.

   Result

   Display (DTC Output)	Proceed to
   P0101 and other DTCs	A
   P0101	B

   HINT: 

   If any DTCs other than P0101 are output, troubleshoot those DTCs first.

B → REPLACE MASS AIR FLOW METER 

A → GO TO DTC CHART