Disc cannot be Ejected: Procedure
- PRESS EJECT AND CHECK OPERATION
- Press the disc eject switch of the radio receiver assembly for 2 seconds or more and check that the disc is ejected.
OK
Disc is ejected.
NG → See step 3
OK: Go to next step
- Press the disc eject switch of the radio receiver assembly for 2 seconds or more and check that the disc is ejected.
- REPLACE DISC AND RECHECK
- Replace the disc with a known good one and recheck.
OK
Disc is ejected.
NG → See step 3
OK → END
- Replace the disc with a known good one and recheck.
- REPLACE RADIO RECEIVER ASSEMBLY. Refer to REMOVAL