LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2011 >> LS 460L AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Service Information) >> Object Recognition Ecu >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Object Recognition Ecu: Removal: Removal

  1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY  . Refer to REMOVAL - Step 3
  2. REMOVE ROPE HOOK ASSEMBLY  . Refer to REMOVAL - Step 4
  3. REMOVE DECK TRIM SIDE BOARD RH  . Refer to REMOVAL - Step 6
  4. REMOVE REAR FLOOR FINISH PLATE  . Refer to REMOVAL - Step 12
  5. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY  . Refer to REMOVAL - Step 8
  6. REMOVE ROPE HOOK  . Refer to REMOVAL - Step 5
  7. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER  . Refer to REMOVAL - Step 11
  8. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH  . Refer to REMOVAL - Step 14
  9. REMOVE OBJECT RECOGNITION ECU 
    Fig 1: Identifying Object Recognition ECU Bolts
    GTY272690Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the 2 connectors.
    2. Remove the 2 bolts.
    3. Detach the 2 clips and remove the ECU.
      NOTE:

      Do not drop or subject the ECU to strong shocks.

scientia non olet · About LEMON Manuals