Installation

1UR-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION

1. INSTALL VVT SENSOR

(a) Install the 4 VVT sensors with the 4 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Connect the 4 VVT sensor connectors.

2. INSTALL CAMSHAFT POSITION SENSOR

(a) Install the camshaft position sensor with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Connect the camshaft position sensor connector.

3. INSTALL AIR CLEANER CAP AND HOSE Installation

4. INSTALL V-BANK COVER SUB-ASSEMBLY Installation