Installation

1UR-FE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSTALLATION

1. INSTALL CRANKSHAFT POSITION SENSOR

(a) Install the crankshaft position sensor with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Connect the crankshaft position sensor connector.

2. INSTALL CRANKSHAFT POSITION SENSOR PROTECTOR

(a) Install the crankshaft position sensor protector with the 2 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)