DTC P0112, P0113: Intake Air Temperature Circuit Low Input; Intake Air Temperature Circuit High Input: Description
Refer to DTC P0111. Refer to DESCRIPTION .
HINT:
When either DTC P0112 or P0113 is set, the hybrid vehicle control ECU enters fail-safe mode. During fail-safe mode, the intake air temperature is estimated to be 20°C (68°F) by the hybrid vehicle control ECU. Fail-safe mode continues until a pass condition is detected.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0112 | Short in intake air temperature sensor circuit for 0.5 seconds (1 trip detection logic) |
|
| P0113 | Open in intake air temperature sensor circuit for 0.5 seconds (1 trip detection logic) |
|
HINT:
When any of these DTCs are set, check the intake air temperature by entering the following menus: Powertrain/Engine and ECT/Intake Air.
| Temperature Displayed | Malfunction |
|---|---|
| -40°C (-40°F) | Open circuit |
| More than 128°C (262°F) | Short circuit |