DTC U0100-211, U0100-530, U0100-784, U0129-220, U0129-222, U0129-527, U0129-528, U0129-529, U0140-146, U1107-436: Lost Communication with ECM/PCM "A"; Lost Communication with ECM/PCM "A"; Lost Communication with ECM/PCM "A"; Lost Communication with Brake System Control Module; Lost Communication with Brake System Control Module; Lost Communication with Brake System Control Module; Lost Communication with Brake System Control Module; Lost Communication with Brake System Control Module; Communication Error from Body ECU to HV ECU; Lost Communication with Power Management Module: Procedure

CHECK DTC OUTPUT
1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Check for DTCs of all systems by following the prompts on the Techstream screen.
  HINT:
  
  If DTCs other than CAN communication DTCs are output simultaneously, first repair the CAN communication problem, and then perform troubleshooting for other DTCs.
NEXT → See step 2
GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING