LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2012 >> IS 250 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Fuel System (Service Information)) >> Fuel Sender Gauge Assembly >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Sender Gauge Assembly: Installation: Installation

WARNING: This page is about a different car, the 2012 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FUEL SENDER GAUGE ASSEMBLY (for RH Side)  See step  19
  2. INSTALL FUEL SENDER GAUGE ASSEMBLY (for LH Side)  See step  7
  3. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY  See step  8
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  5. INSPECT FOR FUEL LEAK  . Refer to ON-VEHICLE INSPECTION - Step 1
  6. INSTALL REAR FLOOR SERVICE HOLE COVER  See step  25
  7. INSTALL NO. 2 REAR FLOOR SERVICE HOLE COVER  See step  11
  8. INSTALL REAR SEAT CUSHION ASSEMBLY  . Refer to INSTALLATION - Step 4
scientia non olet · About LEMON Manuals