LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2013 >> CT 200h Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Can Communication System (Diagnostic Codes & Circuit Tests) >> Can Communication System >> Symptom Tests >> Multi-media Module Receiver Assembly Communication Stop Mode >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Multi-media Module Receiver Assembly Communication Stop Mode: Description

Detection Item Symptom Trouble Area
Multi-media Module Receiver Assembly Communication Stop Mode
  • "Display and Navigation (AVN1)" is not displayed on the CAN Bus Check screen of the Techstream
  • Communication system DTCs (DTCs that start with U) that are output correspond to "Multi-media Module Receiver Assembly Communication Stop Mode" in "DTC Combination Table"
  • Multi-media module receiver assembly branch line or connector
  • Power source circuit of multi-media module receiver assembly
  • Multi-media module receiver assembly*1*2