LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2013 >> GS 350 Base, RWD >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Power Tilt & Telescopic Steering Column (Diagnostics - Introduction) >> Power Tilt And Power Telescopic Steering Column System >> System Description [12/2011 - ] >> System Description [12/2011 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

System Description [12/2011 - ]

  1. FUNCTION OF MAIN COMPONENTS 
    Component Function
    Multiplex tilt and telescopic ECU This ECU sends a control signal to the tilt motor and telescopic motor, based on signals from each switch, to adjust the steering position.
    Tilt motor (Built-in tilt position sensor)
    • This motor is activated by a signal from the multiplex tilt and telescopic ECU and adjusts the tilt position.
    • The tilt position sensor in the motor detects the tilt position by counting the number of pulses as the motor rotates.
    Telescopic motor (Built-in telescopic position sensor)
    • This motor is activated by a signal from the multiplex tilt and telescopic ECU and adjusts the telescopic position.
    • The telescopic position sensor in the motor detects the telescopic position by counting the number of pulses as the motor rotates.
  2. MANUAL OPERATION 
    1. The tilt and telescopic positions can be adjusted as desired by operating the tilt and telescopic switch.
  3. AUTO AWAY/RETURN FUNCTION 
    1. When the engine switch is turned off and the driver side seat belt is unfastened, the steering column moves forward, away from the driver, and also tilts up for easy ingress and egress.

      HINT: 

      If "Seat Move Distance" or "Driver's seat easy exit" in the customize function for the front power seat control system is set to OFF, the auto away function will not operate even when the driver side seat belt is unfastened. Refer to CUSTOMIZE PARAMETERS [12/2011 - ] .

    2. When the engine switch is turned on (IG) or the driver side seat belt is fastened, the steering column returns to the previously set position.

      HINT: 

      If "Seat Move Distance" or "Driver's seat easy exit" in the customize function for the front power seat control system is set to OFF, the auto return function will not operate even when the driver side seat belt is fastened. Refer to CUSTOMIZE PARAMETERS [12/2011 - ] .

    3. The auto away/return function can be prohibited by using the Techstream.
  4. DRIVING POSITION MEMORY FUNCTION 
    1. The system can memorize and recall three driving positions by operating the seat memory switch.

      Even if these positions are changed when the driver gets in or out of the vehicle, the system can restore the memorized position by the one-touch operation if the steering wheel column position and driver side seat position are stored.

scientia non olet · About LEMON Manuals