Multi-media Module Receiver Assembly Communication Stop Mode: Description
| Detection Item |
Symptom |
Trouble Area |
| Multi-media Module Receiver Assembly Communication Stop Mode |
Either condition is met:
- "AVN1" is not displayed on the CAN Bus Check screen of the Techstream. Refer to PROBLEM SYMPTOMS TABLE [08/2012 - ]
- Communication system DTCs (DTCs that start with U) that are output correspond to "Multi-media Module Receiver Assembly Communication Stop Mode" in "DTC Combination Table". Refer to DIAGNOSIS SYSTEM [08/2012 - ]
|
- Multi-media module receiver assembly branch line or connector
- Power source circuit of multi-media module receiver assembly
- Multi-media module receiver assembly ground circuit
- Multi-media module receiver assembly
|
HINT:
"AVN1" refers to the circuit that includes the multi-media module receiver assembly.