Problem Symptoms Table [09/2012 - ]

HINT:

Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

SMART ACCESS SYSTEM WITH PUSH-BUTTON START

Symptom	Suspected Area	Refer to
Power source mode does not change	Engine switch indicator circuit	Refer to Engine Switch Indicator Circuit
	Room oscillator does not recognize key	Refer to Room Oscillator does not Recognize Key
	Engine switch	Refer to INSPECTION [09/2012 - ]
	key	-
	ID code box	-
	Main body ECU	Refer to TERMINALS OF ECU [09/2012 - ]
	Wire harness or connector	Refer to Power Source Mode does not Change
Engine does not start	Push-button start function DTCs	Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2012 - ]
	Power source mode does not change	Refer to Power Source Mode does not Change
	Engine immobiliser system	Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2012 - ]
	Steering lock system	Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2012 - ]
	SFI system	Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2012 - ]
	Engine switch	Refer to INSPECTION [09/2012 - ]
	Park / Neutral position switch	Refer to INSPECTION [09/2012 - ]
	Stop light switch	Refer to PROCEDURE - Step 3
	Main body ECU	Refer to TERMINALS OF ECU [09/2012 - ]
	Wire harness or connector	Refer to Engine does not Start