DTC U0101: Lost Communication with ECM; DTC U0073: Control Module Communication Bus Off; DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0126: Lost Communication with Steering Angle Sensor Module; DTC U0129: Lost Communication with Skid Control ECU; DTC U0142: Lost Communication with Main Body ECU; DTC U0163: Lost Communication with Navigation Control Module; DTC U0182: Lost Communication with AFS ECU; DTC U1000: Can Communication Failure(Message Registry); DTC U1121: Lost Communication with Driver Seat Module [07/2012 - ]: Procedure

CHECK FOR DTC
1. Clear the DTCs. Refer to DTC CHECK / CLEAR [03/2012 - ] .
2. Check for DTCs. Refer to DTC CHECK / CLEAR [03/2012 - ] .
  OK
  
  DTCs are not output.
NG → See step 2

OK → See step 3
GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2012 - ]
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2012 - ]