DTC P0116: Engine Coolant Temperature Circuit Range / Performance Problem (03/2012 - 07/2012): Procedure
- CHECK ANY OTHER DTC OUTPUT (IN ADDITION TO DTC P0116)
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Powertrain / Engine / Trouble Codes.
- Read the DTCs.
Result
Result Proceed to DTC P0116 is output A DTC P0116 and other DTCs are output B HINT:
If any DTCs other than P0116 are output, troubleshoot those DTCs first.
B → See step 4
A: Go to next step
- INSPECT THERMOSTAT
- Inspect the thermostat (thermostat opening temperature). Refer to INSPECTION [03/2012 - ] .
NG → See step 5
OK → See step 3
- REPLACE ENGINE COOLANT TEMPERATURE SENSOR. Refer to REMOVAL [03/2012 - 07/2012]
- GO TO DTC CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART [03/2012 - 07/2012]
- REPLACE THERMOSTAT. Refer to REMOVAL [03/2012 - 07/2012]