DTC P0575: Cruise Control Input Circuit (03/2012 - 07/2012): Procedure

1. Clear the DTCs. Refer to DTC CHECK / CLEAR [03/2012 - ] .
2. Perform the following to make sure that the DTC detection conditions are met.

   HINT: 

   If the detection conditions are not met, the malfunction cannot be detected.

   1. Drive the vehicle at a speed of 50 km/h (31 mph) or more.
   2. Turn the cruise control main switch on.
   3. Push the -SET switch to activate the cruise control.
3. Check for DTCs. Refer to DTC CHECK / CLEAR [03/2012 - ] .

   Result

   Result	Proceed to
   DTC is not output	A
   DTC P0575 is output	B

B → See step   2 

A → See step   3