DTC U0140: Lost Communication with Body Control Module; DTC U0155: Lost Communication with Instrument Panel Cluster (IPC) Control Module; DTC U1115: Lost Communication with Tilt & Telescopic Module [09/2013 - ]: Procedure
- CLEAR DTC
- Clear the DTCs. Refer to DTC CHECK / CLEAR [09/2013 - ] .
NEXT: Go to next step
- CHECK FOR DTC
- Recheck for DTCs and check if the same DTCs are output again.
OK
No DTCs are output.
NG → See step 4
OK → See step 3
- Recheck for DTCs and check if the same DTCs are output again.
- USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2013 - ]
- GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2013 - ]