LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2014 >> IS 250 Base, RWD >> Repair and Diagnosis (Single Page) >> Restraints >> Restraints Control Systems >> Pre-Collision System - Diagnostics - Introduction >> Pre-Collision System >> DTC Check / Clear [04/2013 - 10/2016] >> DTC Check / Clear [04/2013 - 10/2016]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [04/2013 - 10/2016]

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
    5. Check for DTCs.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [04/2013 - 08/2015] , or refer to DIAGNOSTIC TROUBLE CODE CHART [08/2015 - 10/2016] 

      Body Electrical > Pre-Collision 2 > Trouble Codes 

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
    5. Clear the DTCs.

      Body Electrical > Pre-Collision 2 > Clear DTCs 

scientia non olet · About LEMON Manuals