LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> ES 300h >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System (Diagnostics - Introduction) >> Power Steering System >> Freeze Frame Data [08/2014 - ] >> Freeze Frame Data [08/2014 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Freeze Frame Data [08/2014 - ]

  1. FREEZE FRAME DATA 
    NOTE:
    • Freeze frame data values will vary depending on the measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even when the values are within specifications.
    • Turn the power switch on (IG) and park the vehicle on level ground. Check the freeze frame data by using the Techstream.
    1. Turn the power switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the power switch on (IG).
    4. Turn the Techstream on.
    5. Check the freeze frame data on the Techstream.
      EMPS

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Meter Vehicle Velocity Vehicle speed from speedometer/
      Min.: 0.0 km/h (0.0 MPH)
      Max.: 300.0 km/h (186.4 MPH)      		 0 km/h (0 MPH) Power switch on (READY) and vehicle stopped
      No significant fluctuation Power switch on (READY) and vehicle driven at a constant speed
      Motor Actual Current Current to motor/
      Min.: -327.68 A
      Max.: 327.67 A      		 Value changes in proportion to steering effort
      - The value increases when turning right and decreases when turning left      		 Power switch on (READY) and steering wheel being turned
      Command Value Current Requested current to motor/
      Min.: -327.68 A
      Max.: 327.67 A      		 Value changes in proportion to steering effort
      - The value increases when turning right and decreases when turning left      		 Power switch on (READY) and steering wheel being turned
      Steering Angle Velocity Steering angle speed/
      Min.: -32768 deg/s
      Max.: 32767 deg/s      		 Value changes in proportion to steering speed
      - The value increases when turning left and decreases when turning right      		 Power switch on (READY) and steering wheel being turned
      Thermistor Temperature ECU substrate temperature/
      Min.: -50.0°C (-58.0°F)
      Max.: 150.0°C (302.0°F)      		 -50°C to 150°C (-58°F to 302°F) -
      PIG Power Supply Power source voltage to active motor/
      Min.: 0.0000 V
      Max.: 20.1531 V      		 9 to 16 V Always
      IG Power Supply IG power source voltage/
      Min.: 0.0000 V
      Max.: 20.1531 V      		 8 to 16 V Power switch on (IG)
      Steering Wheel Torque Steering wheel torque/
      Min.: -327.68 Nm
      Max.: 7.00 Nm      		 Value changes in proportion to steering effort
      - The value increases when turning left and decreases when turning right      		 Power switch on (READY) and steering wheel being turned
      Motor Rotation Angle Motor rotation angle/
      Min.: 0.000 deg
      Max.: 1441.770 deg      		 During steering operation, motor rotation angle value changes from 0 to 360° Power switch on (READY) and steering wheel being turned
      Command Val Current 2 Requested current to motor/
      Min.: -327.68 A
      Max.: 327.67 A      		 Value changes in proportion to steering effort
      - The value increases when turning left and decreases when turning right      		 Power switch on (READY) and steering wheel being turned
      Motor Voltage Motor power supply voltage/
      Min.: 0.000 V
      Max.: 98.000 V      		 9 to 16 V Always
      Motor Terminal Volt (U) Motor terminal voltage (U phase)/
      Min.: 0.000 V
      Max.: 98.000 V      		 Value changes within 4 to 16 V range Power switch on (READY) and steering wheel being turned
      Motor Terminal Volt (V) Motor terminal voltage (V phase)/
      Min.: 0.000 V
      Max.: 98.000 V      		 Value changes within 4 to 16 V range Power switch on (READY) and steering wheel being turned
      Motor Terminal Volt (W) Motor terminal voltage (W phase)/
      Min.: 0.000 V
      Max.: 98.000 V      		 Value changes within 4 to 16 V range Power switch on (READY) and steering wheel being turned
      Torque Sensor 1 Output Torque sensor voltage/
      Min.: 0.0000 V
      Max.: 4.9725 V      		 2.3 to 2.7 V Power switch on (READY) and steering wheel not being turned (without load)
      2.5 to 3.8 V Power switch on (READY) and steering wheel being turned to the right with vehicle stopped
      1.2 to 2.5 V Power switch on (READY) and steering wheel being turned to the left with vehicle stopped
      Torque Sensor 2 Output Torque sensor voltage/
      Min.: 0.0000 V
      Max.: 4.9725 V      		 2.3 to 2.7 V Power switch on (READY) and steering wheel not being turned (without load)
      1.2 to 2.5 V Power switch on (READY) and steering wheel being turned to the right with vehicle stopped
      2.5 to 3.8 V Power switch on (READY) and steering wheel being turned to the left with vehicle stopped
      TRQ1 Zero Point Value Torque sensor voltage/
      Min.: 0.0000 V
      Max.: 4.9725 V      		 Values differ depending on vehicle Power switch on (READY) and steering wheel not being turned
      TRQ2 Zero Point Value Torque sensor voltage/
      Min.: 0.0000 V
      Max.: 4.9725 V      		 Values differ depending on vehicle Power switch on (READY) and steering wheel not being turned
      PS Assist Signal Power steering assist signal/
      OFF or ON      		 OFF Power switch on (IG)
      ON Power switch on (READY)
      Ready Status Ready status/
      OFF or Ready      		 OFF or Ready -
      Motor Actual Current 2 Current to motor/
      Min.: -327.68 A
      Max.: 327.67 A      		 Value changes in proportion to steering effort
      - The value increases when turning right and decreases when turning left      		 Power switch on (READY) and steering wheel being turned
scientia non olet · About LEMON Manuals